Level 2 EV Charger Installation in Lake Wylie, SC

Our Charlotte team, operating from our Matthews branch, completed a permitted Level 2 EV charger installation for Duke Energy - Allumia in Lake Wylie, SC. Led by technician Mark Viktorovich, this project delivered a safe, code-compliant home charging solution on November 24, 2025.

Whether you’re adding your first EV or upgrading your charging speed, Touchstone Electric provides turnkey installations with permitting, dedicated circuitry, and rebate support to make the process simple.

What this installation included

Dedicated 60-amp breaker: A new 60A breaker was installed to supply the Level 2 EVSE with the proper ampacity and headroom.
6/2 NM-B wiring run: Approximately 50 feet of 6/2 NM-B Romex was routed along a code-compliant pathway. Conduit was used where required for protection and neatness.
Panel optimization: Two 20-amp tandem breakers were added as needed to manage panel space while maintaining safe circuit distribution.
Customer-supplied charger connection: The homeowner-provided Level 2 charging equipment was professionally connected to the new dedicated circuit.
Permit and inspection: Touchstone Electric handled the permitting process and coordinated inspection to ensure full compliance with local and state codes.
Duke Energy rebate assistance: We prepared supporting documentation and guided the customer through the rebate process to help maximize available incentives.

Safe, code-compliant EV charging at home

Every EV charging project we perform in Lake Wylie follows National Electrical Code requirements and local amendments. From proper conductor sizing and overcurrent protection to labeling and equipment mounting, our team prioritizes safety and reliability on day one and over the long term.

Load-considered, dedicated circuit for the EVSE
Clean, protected wiring paths and professional terminations
Clear labeling and a tidy, serviceable installation
Final inspection coordination for added peace of mind

Duke Energy rebate support

Navigating rebates can be confusing. Touchstone Electric helps Lake Wylie homeowners and program partners document their installation and submit for available Duke Energy incentives. Our goal is to streamline the process so you can start charging faster while reducing out-of-pocket costs.

Why Lake Wylie homeowners choose Touchstone Electric

Local expertise: Charlotte-based team serving Lake Wylie, SC with fast scheduling and familiarization with local inspectors.
Turnkey service: We handle permits, dedicated circuits, and setup for your charger—no guesswork.
Experienced technicians: Skilled electricians like Mark Viktorovich deliver neat, reliable, and safe results.
Rebate-savvy: Guidance on Duke Energy incentives and documentation so you don’t leave money on the table.

Customer feedback

Following completion, the customer praised our team in their review for a smooth process and a clean, code-compliant installation. While a Google review share link is not available for this project, we appreciate the positive feedback and are proud to support reliable home charging across Lake Wylie.

Serving Lake Wylie, SC and the Charlotte area

If you need a Level 2 EV charger installed in Lake Wylie or nearby communities, our Matthews-based Charlotte team is ready to help. We make it easy to upgrade to faster home charging with proper permitting, a dedicated 60A circuit, and expert setup for your EVSE.

Contact Touchstone Electric to schedule a visit or request an on-site assessment for your home EV charging needs.

Level 2 EV Charger Installation in Lake Wylie, SC | Permit & 60A