Electrical Panel Upgrade & Home Surge Protection in Pittsboro, NC completed by Touchstone Electric
Completed Project

Electrical Panel Upgrade & Home Surge Protection in Pittsboro, NC

Panels & Service Upgrades completed by Touchstone Electric in Pittsboro.

PittsboroCompleted: April 1, 2026
Service TypePanels & Service Upgrades
Project TypePanel Upgrades
Work StandardCode compliant
Performed ByLicensed electricians
Call 855-502-2244

Electrical Panel Upgrade and Surge Protection in Pittsboro, NC

Our Raleigh branch recently helped homeowner Janet Braxton in Pittsboro, NC with a comprehensive electrical safety upgrade. On April 1, 2026, technician Brad Williams replaced the home’s main electrical panel, installed a whole-home surge protection system with $50,000 coverage and a 10-year term, and added a dedicated 20A circuit to power a freeze dryer.

This project was permitted and inspected to ensure full code compliance and long-term reliability. Every installation from Touchstone Electric is backed by our Signature Lifetime Craftsmanship Warranty.

Why This Upgrade Was Needed

Modern homes rely on more sensitive electronics and higher electrical demand than ever before. Upgrading the main panel and adding surge protection helps safeguard your electrical system, appliances, and devices from hazards like lightning-related surges, power grid fluctuations, and routine equipment cycling.

We also installed a dedicated 20-amp circuit for a freeze dryer, ensuring it has the capacity and isolated path it needs to start and run without nuisance tripping or voltage drop from shared loads.

Main Panel Replacement: Safer, Cleaner, Code-Compliant

We replaced the main electrical panel and brought the installation up to current code. The new panel features an aluminum bus and includes a 20-year transferable manufacturer warranty on the panel, in addition to our craftsmanship coverage.

Our scope included labeling circuits, grounding and bonding, reconnecting the service entrance conductors, and neatly re-terminating existing branch circuits. During the upgrade process, we also evaluate requirements such as AFCI/GFCI protection under current code and discuss any recommended breaker updates with the homeowner.

Whole-Home Surge Protection: $50K/10-Year Coverage

To protect the entire electrical system, we installed a panel-mounted surge protective device designed to divert damaging voltage to ground before it reaches sensitive equipment. This system includes $50,000 of coverage over 10 years for protected appliances and hardwired equipment, providing valuable peace of mind for the homeowner.

With surge protection at the service, everyday spikes are mitigated, helping extend the lifespan of HVAC systems, refrigerators, washers/dryers, lighting, and more.

Dedicated 20A Circuit for Freeze Dryer

Freeze dryers often require a steady, dedicated supply to start reliably and run efficiently. We installed a new 20-amp circuit with properly sized conductors and a new outlet location for convenient access and dependable operation.

Permitting, Inspection, and Minimal Downtime

All work was completed under permit and scheduled for inspection. We plan panel changeouts to minimize downtime, keep the workspace clean, and communicate clearly so homeowners know what to expect throughout the process.

What We Installed on This Pittsboro Project

  • Permit pulled and inspection coordinated
  • Main electrical panel replacement with aluminum bus (indoor), code-compliant labeling, grounding, and bonding
  • Whole-home surge protector with $50K coverage and 10-year term
  • New dedicated 20A circuit for a freeze dryer, including new outlet
  • Breaker updates to match the home’s circuits:
    • 5x 30A standard double-pole breakers
    • 1x 30A standard single-pole breaker
    • 1x 20A standard double-pole breaker
    • 11x 20A standard single-pole breakers
    • 7x 15A standard single-pole breakers
  • Approximately 20 feet of NM-B 12/2 cable for the new 20A run
  • 1x standard receptacle with cover for the new circuit

Local Expertise from Our Raleigh Team

Touchstone Electric’s Raleigh branch serves homeowners throughout Pittsboro, NC with panel upgrades, service changes, and surge protection. Our licensed electricians prioritize safety, neat workmanship, and clear communication—backed by permitting, inspection, and strong warranties.

Customer Feedback

Janet praised our team with a review after the project was completed. You can see it here: Read Janet’s Google review.

Considering a Panel Upgrade in Pittsboro?

If your lights flicker, breakers trip frequently, or you’re adding high-demand equipment, a modern panel and whole-home surge protection can make your home safer and more reliable. Contact our Raleigh team to schedule an assessment for your Pittsboro home.