Call 855-502-2244
Project overview in Salisbury, NC
Our Charlotte branch (based in Matthews) completed a comprehensive Panels & Service Upgrade with a Meter Base & Service Replacement for homeowner Abramowski in Salisbury, NC. On May 13, 2026, lead electrician Chris Rogers upgraded the service equipment, installed a new indoor 200A subpanel, modernized grounding, and organized the home’s circuits for safer, more reliable power.
- Installed a 200A meter/panel combo with feed-through lugs
- Pulled permits and coordinated the utility power drop
- Ran approximately 60 ft of 4/0, 4‑wire SER feeder to the new indoor 200A subpanel
- Upgraded the grounding system with a new ground rod and continuous grounding electrode conductor
- Installed and labeled new breakers to match the home’s loads
What we installed and why it matters
This Salisbury home was ready for a service modernization that supports today’s appliance and HVAC demands while aligning with current code. The new meter/base combo provides a clean, safe utility interface, and the indoor 200A aluminum subpanel delivers capacity for present and future circuits. The 4‑wire SER feeder ensures separate neutral and equipment grounding conductors for improved safety and proper fault clearing.
As part of the upgrade, we replaced and verified the grounding system. A properly driven ground rod and a continuous grounding electrode conductor (GEC) back to the main service ensure the bonding and grounding paths meet inspection requirements and manufacturer specifications.
Our team manages permitting and utility coordination to minimize downtime. When requested, we can make a temporary generator available for limited essential loads during the scheduled outage.
Breaker layout installed
To balance loads and provide the right protection for each circuit, Chris installed and labeled the following breakers in the new subpanel:
- 1 × 60A double‑pole
- 1 × 50A double‑pole
- 4 × 30A double‑pole
- 10 × 20A single‑pole
- 5 × 15A single‑pole
This configuration supports larger equipment like ranges, dryers, water heaters, condensers, and EV charging, while giving small-appliance and lighting circuits dedicated protection and room to expand.
Code compliance and inspection readiness
Touchstone Electric follows current NEC practices and local inspection requirements in Rowan County and across Salisbury, NC. During panel and service work, we focus on secure terminations, correct conductor sizing, proper neutral/ground separation in subpanels, and clear circuit labeling. Inspectors may require AFCI or GFCI upgrades on certain circuits under newer code cycles; our team identifies where those protections apply and can provide solutions if an existing condition (such as a shared neutral) needs correction.
Local electricians serving Salisbury
As a Charlotte branch team, we regularly perform meter base replacements, 200A panel upgrades, and service equipment modernizations throughout Salisbury, NC. From utility coordination to final inspection, we streamline the process so your home returns to normal quickly—with safer, code‑compliant power ready for today’s loads and tomorrow’s additions.
Customer review
After completion, Abramowski praised our team with a review. You can read the review on Google.
Need a meter base or 200A subpanel upgrade in Salisbury?
Whether you’re planning an EV charger, remodeling, or resolving capacity issues, Touchstone Electric’s Charlotte branch is ready to help. Our licensed electricians in Salisbury deliver clean workmanship, clear communication, and smooth inspections on every panel and service upgrade. Reach out to schedule an on‑site evaluation and get your home’s electrical system prepared for the future.