200A Electrical Panel Upgrade and Breaker Replacement in Maiden, NC

Our Charlotte branch completed a comprehensive main panel replacement and breaker upgrade for homeowner Josh Bauer in Maiden, NC. Led by technician Patrick Burke, this project was finished on July 8, 2025 and brought the home’s electrical system up to current code with a safer, higher-capacity copper panel and new protective devices.

Project Overview

We replaced the indoor main panel with a 200A copper panel, reconnected existing circuits, and performed full grounding and bonding to ensure code compliance and reliable fault protection. The work included coordinated permitting and inspection. During the planned outage, a temporary generator was made available for limited essential power.

What We Upgraded

Main 200A Copper Panel (indoor): Removed the existing panel; installed a new copper-bus panel; replaced the main lug; labeled all circuits; reconnected the service entrance conductors; and verified proper grounding and bonding.
Whole-Home Surge Protection: Installed a surge protective device to help defend sensitive electronics and appliances from voltage spikes.
New Breakers Installed:
- 1 × 100A (2-pole) for a subpanel
- 3 × 60A standard
- 1 × 50A standard
- 1 × 40A standard
- 3 × 30A standard (double pole)
- 2 × 20A standard (double pole)
- 12 × 20A standard
- 4 × 15A standard
Circuit Verification: Reconnected existing branch circuits and labeled each breaker for quick identification and future service.
Permitting and Inspection: All work performed under permit and prepared for inspection per current codes.
On-Site Team: Technician Patrick Burke with assistance from an electrical apprentice to ensure an efficient, tidy installation.

Built for Safety, Capacity, and Code Compliance

A 200A copper panel provides robust capacity for today’s loads and future upgrades like EV chargers, HVAC, and modern kitchens. Copper bus architecture offers excellent conductivity and heat resistance for long-term reliability. Our team also ensured proper bonding and grounding to help clear faults quickly and reduce shock hazards.

As authorities adopt the 2020 NEC, inspectors may require AFCI protection on certain circuits. In some homes, preexisting conditions such as shared neutrals can cause nuisance tripping and may require additional diagnostic work to resolve. We walk homeowners through these options to keep installations safe and compliant.

Local Electricians Serving Maiden, NC

This project was completed by Touchstone Electric’s Charlotte team, serving Maiden and the greater region. If you need a panel or service upgrade, we provide thorough assessments, clear labeling, clean workmanship, and coordinated inspections—so you can count on a safe, dependable electrical system.

Customer Feedback

After completion, Josh Bauer praised our work with a Google review. You can view the feedback here: See the Google review.

Need a Panel Upgrade in Maiden?

Whether you’re replacing an outdated panel, adding capacity for renovations, or addressing safety concerns, Touchstone Electric is ready to help. Our Charlotte branch delivers code-compliant panel upgrades, breaker replacements, grounding/bonding corrections, and whole-home surge protection throughout Maiden, NC.

200A Electrical Panel Upgrade & Breaker Replacement in Maiden, NC