Call 855-502-2244
200 Amp Panel Upgrade and Surge Protection in Charlotte, NC
Touchstone Electric’s Charlotte branch (Matthews) completed a comprehensive 200 amp panel upgrade and whole-home surge protection for GJK Remodeling, LLC in Charlotte. Led by Technician Ben Lively, this project was finished on April 30, 2025 and executed per stamped customer-provided electrical plans and current NEC requirements.
As a Panels & Service Upgrades specialist, our team delivered a code-compliant service that improves safety, reliability, and future capacity for the home’s electrical system—start to finish, including permitting and inspections.
Scope of Work Completed
- New 200A main panel: Installed a 40/80-space 200-amp panel with a new feeder from the meter to the panel.
- Labeling and organization: Fully labeled all circuits and ensured neat, serviceable wire management.
- Grounding system: Installed two ground rods with a grounding electrode conductor (GEC) from the meter for proper bonding and grounding.
- Main breaker disconnect: Installed a code-compliant main disconnect in accordance with NEC.
- Whole-home surge protector: Added a surge protective device meeting NEC 2020. The installed unit includes a $10,000 appliance protection warranty from the manufacturer.
- Smoke detector interlink: Hard-wired and interconnected smoke detectors for whole-home alerting.
- AFCI protection for lighting: Added arc-fault protection to enhance safety on lighting circuits.
- GFCI protection: Dedicated 20A GFCI circuits for laundry and bathrooms per current code.
- Branch wiring and devices: Wired outlets, lights, and switches per plans and NEC; replaced standard and GFCI receptacles, switches, and plates. Tamper-resistant receptacles included during redevice.
- Trim-out and equipment connections: Installed/supplied smoke detectors; connected vent fans; installed disconnects for HVAC/major appliances; connected customer-supplied disposal, dishwasher, range, cooktop, microwave, and dryer; set fixtures per plan.
Materials, Breakers, and Circuitry
- Wiring: NM-B 14/2 cable for 15A lighting and general-purpose circuits where specified.
- Breakers: Standard 15A breakers for bathroom lighting and general branch circuits; 20A breakers dedicated to small appliance circuits; AFCI protection applied to lighting per plan.
- Panel work: Grounded and bonded the panel, reconnected existing circuits, and verified terminations at all landed boxes.
This balanced layout supports present loads and provides room for future additions without compromising safety or performance.
Permitting, Inspections, and Code Compliance
We handled the electrical permit and coordinated both rough-in and final electrical inspections. All work followed NEC 2020 standards and the stamped electrical plans, with attention to grounding/bonding, overcurrent protection, GFCI/AFCI requirements, and life-safety devices like interconnected smoke detectors.
From rough to trim-out, our Charlotte team ensured each milestone passed inspection before proceeding—giving the homeowner and contractor confidence in a safe, resilient system.
Safety and Long-Term Reliability
- System protection: A whole-home surge protector helps safeguard electronics and appliances from voltage spikes.
- Life safety: Interlinked, hard-wired smoke detectors provide home-wide alerts.
- Modern protections: GFCI and AFCI coverage bring circuits in line with today’s safety expectations.
- Room to grow: A 40/80-space 200A panel supports future remodels and additions.
Local Expertise You Can Trust
Touchstone Electric serves Charlotte, NC with a dedicated branch in Matthews. Whether you need a full electrical panel upgrade, a service upgrade, or help with surge protection and life-safety devices, our licensed team delivers clean workmanship and inspection-ready results.
GJK Remodeling, LLC praised our work with a review. Read it here: Google Review.