Call 855-502-2244
15A Circuit Breaker Replacement and PVC Conduit Install in Matthews, NC
Our Charlotte branch completed a fast, code-conscious service visit for Michael Carpenter in Matthews, NC. On August 18, 2025, technician Aaron Caddel replaced a 15-amp tandem breaker serving standard branch circuits and installed a clean, protected pathway for wiring using 3/4 in. PVC conduit. The result: improved reliability at the panel and durable mechanical protection for conductors—finished neatly and in line with manufacturer instructions and electrical code.
Scope of Work
- 15A Tandem Breaker Replacement: Removed the existing device and installed a new 15-amp tandem breaker sized for standard branch circuits. Verified panel compatibility, proper seating on the bus, and correct torque per the breaker manufacturer’s specifications.
- 3/4 in. PVC Conduit Installation (15 ft): Mounted and secured approximately 15 feet of Schedule 40 PVC with appropriate supports, connectors, and LBs as applicable. All fittings were tightened, transitions were kept accessible, and the conduit path was laid out to protect conductors and maintain a tidy, professional finish.
This project falls under our Panels & Service Upgrades category and also aligns with our Circuit Breaker Repair & Replacement services.
Why Replace a 15A Tandem Breaker?
Tandem breakers are commonly used when panel space is limited, allowing two 120V circuits to share a single breaker position when the panel is listed for that configuration. If a breaker shows signs of wear, trips frequently, or no longer holds reliably, replacement helps restore dependable protection for connected branch circuits. Installing a properly rated, panel-approved 15A device helps safeguard wiring and connected loads while keeping the panel within its listing and labeling.
Conduit Done Right
Conduit adds mechanical protection and helps organize circuit routing. Our Matthews, NC installation used 3/4 in. PVC to provide a smooth, secure pathway with proper support spacing, clean terminations, and accessible LBs for future maintenance. Attention to bend radius, strap placement, and fitting selection helps ensure long-term performance and easier servicing down the road.
Our Process for Safe, Code-Compliant Results
- Assessment: Identify the correct breaker type and panel positions approved for tandem use; confirm circuit ampacity.
- Replacement: De-energize as required, remove the old device, verify conductor condition and terminations, and install the new breaker with the correct torque.
- Conduit Layout: Plan a secure path, mount PVC with appropriate supports, and use connectors and LBs as needed for accessibility.
- Final Checks: Inspect labeling, tidy up conductor routing, and test operation of the affected circuits.
Results and Homeowner Feedback
The standard branch circuits are now protected by a reliable 15A tandem breaker, and the wiring benefits from organized, durable PVC protection. Michael Carpenter praised our work with a review—see it here: View the Google review.
Signs You May Need Breaker or Conduit Service
- Frequent nuisance trips or a breaker that won’t reset
- Warmth at the breaker face or a buzzing sound from the panel
- Flickering or intermittent power on a specific circuit
- Exposed cable runs that need mechanical protection
- Cracked, loose, or improperly supported conduit
Choose Touchstone Electric in Matthews, NC
From our Charlotte branch, Touchstone Electric provides careful troubleshooting, clean workmanship, and code-focused solutions for panels, tandem breakers, and conduit installations throughout Matthews, NC. We explain options clearly, respect your home, and complete the work with an eye for safety and long-term reliability.
If you need circuit breaker repair, panel upgrades, or PVC conduit installation in Matthews, NC, our team is ready to help with efficient, code-compliant service.