Project overview: 100A service disconnect and subpanel in Rock Hill
Touchstone Electric’s Matthews-based Charlotte team completed a Panels & Service Upgrades project in Rock Hill, SC for Ivy Creek Pools. On July 30, 2025, technician Will Cruz installed a new 100A exterior service disconnect, added a subpanel with a 4‑wire feeder, and ran dedicated circuits for a hot tub, a back fireplace, and a refrigerator. We also installed a ceiling fan and updated the vanity light box before reinstalling the customer’s vanity fixture.
This upgrade brings the home in line with the 2020 electrical code requirement for an exterior service disconnecting means, improves safety, and provides room for future expansion.
Highlights of the Rock Hill service upgrade
- New 100A exterior service disconnect: A weather-rated, outside-mounted disconnect that serves as the service’s primary shutoff.
- Subpanel with 4-wire feeder: Grounds and neutrals separated per code, with a SER 2/0 four-conductor feeder from the disconnect to the subpanel.
- Three new dedicated circuits: Hot tub, back fireplace, and refrigerator circuits to support reliable operation and reduce nuisance tripping.
- GFCI protection for the hot tub: A 50A GFCI breaker enhances protection in a wet environment.
- Fixture upgrades: One ceiling fan installed; vanity light box replaced to a secure, code-compliant box and vanity light reinstalled.
- Permitting and coordination: Work performed under permit with required utility shutoff/reconnection coordinated. Temporary power was available for limited use during the outage.
What we installed
- 100A outdoor service disconnect: Meets 2020 code for an exterior disconnecting means and sets the stage for proper subpanel grounding/neutral separation.
- Feeder and subpanel components: Approximately 40 ft of SER 2/0 (4‑wire) from the disconnect to the subpanel and a 100A 2‑pole breaker serving the subpanel.
- Hot tub and appliance circuits: A 50A GFCI breaker for the hot tub; two 20A standard breakers supporting the back fireplace and the refrigerator.
- Wiring for new runs: About 40 ft of UF‑B 12/2 for direct‑burial 20A circuits, and THHN #6 conductors where a 60A‑class circuit was appropriate.
- Lighting and fan work: Installation of one customer‑supplied ceiling fan and a vanity light after replacing the existing box with a properly rated one.
Why this upgrade matters
- Safety and compliance: The exterior service disconnect enables fast emergency shutoff and aligns the home with current code requirements.
- Cleaner grounding system: Separating neutrals and grounds in the subpanel reduces objectionable currents and improves overall system safety.
- Reliability for high‑demand equipment: Dedicated, correctly sized circuits help hot tubs, fireplaces, and refrigerators run without overloading other circuits.
- Protection where it counts: GFCI protection on the hot tub circuit adds a critical layer of safety around water.
- Room to grow: The new subpanel provides space for future circuits and upgrades as needs change.
Local, permitted electrical work in Rock Hill, SC
As a local residential electrical contractor serving Rock Hill from our Matthews branch, we follow area permitting and inspection processes and coordinate with the utility when service work requires an outage. Our team ensures neat workmanship, clear labeling, and thorough testing before we leave the site.
Customer feedback
Ivy Creek Pools praised our team with a positive review after this project. We appreciate the trust and the opportunity to deliver a safe, code‑compliant upgrade.
Need a service disconnect or subpanel in Rock Hill?
If you’re planning a hot tub, outdoor feature, or other high‑demand addition, Touchstone Electric can design and install the right service disconnect, subpanel, and dedicated circuits for your home in Rock Hill, SC. Contact our Charlotte team to schedule an on‑site assessment and get your project moving with confidence.
